No drawings found.
* Last version maybe changed.
Generators Assembly 320-3716 Generator AR(Caterpillar 3512B generator set)
Part NO.
320-3716
Name
Generator AR
Section
Generators
Modifier
-
SNP
DGP
IESCN
SEBP67650648
Updated
2018-09-17
Stock
China GuangZhou
Accept Payment
T/T, Western Union, Alipay, Paypal, L/C
Shipping Method
Sea, Air or DHL/FEDEX/TNT/EMS
CAT 3512B Generators 320-3716 Assembly
320-3716 Generator AR , S/N 7TN4525-UP, 50-HERTZ. 600-VOLT
Model: Caterpillar 3512B
Catalog: Generator Set
Section: Generators
Grp.
Ref.
Part NO.
Name
Modify
Note
Comments
Quantity
Maint
S: DGP / DGP (1 ~ 99999)
:
: (INCLUDES End STOP, DIVIDERS, Terminal BLOCKS, JUMPERS, TOOL, Fuses & PLUGS)
:
: Install Film ON The RH Side OF The Generator BARREL, Centered From Front TO BACK,
: APPROX. 100-MM Down From The Center Line AT The Top OF The GENERATOR.
: Install Clear Laminate Over FILM.
: Film IS Provided BY SUPPLIER.
: Install Inside OF Generator Housing ON Panel Next TO Space Heater Terminal STRIP.
: Install One Directly Above Each Lifting Hole ON Generator BARREL.
: Install Near Generator Ground Bolt OR Generator Ground Customer Connection POINT.
: Install Film ON The Rear Panel OF The Generator Terminal BOX, Centered APPROX. 30MM From The Top OF The Rear PANEL.
: IF There IS AN Air Cleaner INSTALLED,
: Move Film Below Air Cleaner Centered Along The Top Edge OF The Bottom Half Moon Shaped COVER.
: Install One Film ON The RH & LH Side OF The Generator Terminal BOX, AT The Top LH Corner OF The Terminal BOX,
: Align Each Film With The Edges OF The Terminal Box COVER.
: Install One Film ON The RH & LH Sides OF The Generator Terminal BOX, Centered Above The Crush Warning Film
: And One Film ON The Rear OF The Terminal BOX, Centered Below The 229-5047 FILM.
: Install One Film ON Each Side OF The Generator BARREL, Directly ON The Generator BARREL, Not ON The Barrel COVER.
: IF There IS NO Barrel COVER, Center Films ON Each Side OF The Barrel From Front TO REAR,
: And ON The RH SIDE, Center Film Below The 118-8452 Glps Generator Info FILM.
: Install One Film ON The RH & LH Sides OF The Generator Terminal BOX, Centered Above The Auto Start Warning
: And One Film ON Rear OF The Terminal BOX, Centered Below The Caterpillar Trademark DECAL.
: Install ON Generator Front Panel Assembly ON RH Side OF PACKAGE, Next TO Generator Information PLATE.
: Install ON RH Side OF Generator Barrel AT Front Using 2K-3219 Drive Screws TO INSTALL.
R: Remanufactured Part May BE Available
Y: Separate Illustration
*Assembly 320-3716 Generator AR Suitable for 3512B Generator Set Generators
*Original 320-3716 Assembly contains Regular Invoice included, After-sales service is provided by the official.
*Used 320-3716 Assembly offer Customs Invoice, After-sales service is provided.
*All Taxes included, no more extra fee.
*Shipping country: Asia China SZ / US(depends on local tax rate,effectiveness/tax rate will be prioritized).